User manual

Fig. 8: Wall mounting straps bintec W1002n
3.2.2 Connectors
All the connections are located on the underside of the device.
On bintec W1002n the third antenna connection is located on the underside of the device.
bintec W1002n has two Ethernet ports and a serial interface.
The connections are arranged as follows:
Fig. 9: bintec W1002n underside
bintec W1002n underside
1 POWER Socket for plug-in power pack
2 CONSOLE Serial interface
3 RESET Reset button
4 ETH1/PoE and
ETH2
10/100 Base-T Ethernet interface
5 ANT3 Connections for screwing on the external antennas
ANT3 = RX3
Teldat GmbH
3 Installation
bintec WLAN and Industrial WLAN 17