User manual

.
Note
If you delete the boot configuration using the GUI, all passwords will also be reset and
the current boot configuration deleted. The next time, the device will boot with the
standard ex works settings.
Note
If you have changed the LED behavior to something other then the default value, this
setting is preserved after resetting the device.
3.2 bintec W1002n
3.2.1 Setting up and connecting
Note
All you need for this are the cables and antennas supplied with the equipment.
Caution
The use of the wrong mains adapter may damage your device. Only use the mains ad-
aptor supplied! If you require foreign adapters/mains units, please contact our Teldat
service.
bintec W1002n is equipped with a single radio module and three standard screw-on anten-
nas. Power is supplied through a wall power supply or through PoE (Power over Ethernet).
3 Installation Teldat GmbH
14 bintec WLAN and Industrial WLAN