User manual

Field Description
Possible values:
• ",
•  %,
• 7 
•  F
• <
• 
• / :
• /%
• /% %,
The default value is ",.
See RFC 792.
Connection State
Only if Protocol = /)!
You can define a filter that takes the status of the TCP connec-
tions into account.
Possible values:
• ", (default value): All TCP packets match the filter.
• : All TCP packets that would not open any new
TCP connection on routing over the gateway match the filter.
Destination IP Ad-
dress/Netmask
Enter the destination IP address and netmask of the data pack-
ets.
Possible values:
• ", (default value)
• ;: Enter the IP address of the host.
• 2-5: Enter the network address and the related net-
mask.
Destination Port/Range
Only if Protocol = /)!, +7!
Enter a destination port number or a range of destination port
numbers that matches the filter.
Teldat GmbH
12 Networking
bintec WLAN and Industrial WLAN 263