User manual

Note
If you change the LED behavior through the GUI or the WLAN Controller, this setting
is preserved if you reset the device to the ex-works state.
State Only the status LED flashes once per second.
Flashing All LEDs show their standard behavior.
Off All LEDs are deactivated.
3.1.4 Scope of supply
Your device comes with the following accessories:
Cable sets/mains unit/other Software Documentation
bintec W1003n
Ethernet cable (RJ-45, STP)
Self-adhesive feet
Wall or ceiling mounting
Companion
DVD
Quick Install Guide (printed)
R&TTE Compliance Informa-
tion (printed)
User's Guide (on DVD)
Safety notices
bintec W2003n
Ethernet cable (RJ-45, STP)
Self-adhesive feet
Wall or ceiling mounting
Companion
DVD
Quick Install Guide (printed)
R&TTE Compliance Informa-
tion (printed)
User's Guide (on DVD)
Safety notices
bintec
W2003n-ext
Ethernet cable (RJ-45, STP)
4 external standard RSMA an-
tennas
Self-adhesive feet
Wall or ceiling mounting
Companion
DVD
Quick Install Guide (printed)
R&TTE Compliance Informa-
tion (printed)
User's Guide (on DVD)
Safety notices
bintec W2004n
Ethernet cable (RJ-45, STP)
Self-adhesive feet
Wall or ceiling mounting
Companion
DVD
Quick Install Guide (printed)
R&TTE Compliance Informa-
tion (printed)
User's Guide (on DVD)
Teldat GmbH
3 Installation
bintec WLAN and Industrial WLAN 11