User manual

Fields in the menu Extended Route Parameters
Field Description
Description Enter a description for the IP route.
Source Interface Select the interface over which the data packets are to reach
the device.
The default value is 2.
New Source IP Ad-
dress/Netmask
Enter the IP address and netmask of the source host or source
network.
Layer 4 Protocol Select a protocol.
Possible values: 6)=!, 61=!, /)!, +7!, 1<, !, ";, 8!,
!6=, ./!, ",.
The default value is ",.
Source Port Only for Layer 4 Protocol = /)! or +7!
Enter the source port.
First select the port number range.
Possible values:
• ", (default value): The route is valid for all port numbers.
• : Enables the entry of a port number.
• <: Enables the entry of a range of port numbers.
• !0: Entry of privileged port numbers: 0 ... 1023.
• 0: Entry of server port numbers: 5000 ... 32767.
• ) : Entry of client port numbers: 1024 ... 4999.
• ) : Entry of client port numbers: 32768 ... 65535.
• 2 %0: Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
Destination Port Only for Layer 4 Protocol = /)! or +7!
Enter the destination port.
12 Networking Teldat GmbH
226 bintec WLAN and Industrial WLAN