User manual
Field Description
• ; < 0 6: Route to an individual host
via a specific interface.
• ; < 0 1-,: Route to an individual host via
a specific gateway.
• 2-5 < 0 6 (default value): Route to
a network via a specific interface.
• 2-5 < 0 1-,: Route to a network via a
specific gateway.
Only for interfaces that are operated in DHCP client mode:
Even if an interface is configured for DHCP client mode, routes
can still be configured for data traffic via that interface. The set-
tings received from the DHCP server are then copied, along
with those configured here, to the active routing table. This en-
ables, e. g., in the case of dynamically changing gateway ad-
dresses, particular routes to be maintained, or routes with differ-
ent metrics (i. e. of differing priority) to be specified. However, if
the DHCP server sends static routes, the settings configured
here are not copied to the routing.
• 7 < /% % 7;)!: The routing in-
formation is taken entirely from the DHCP server. Only ad-
vanced parameters can be additionally configured. This route
remains unchanged by other routes created for this interface
and is copied to the routing table in parallel with them.
• ; < /% % 7;)!: The settings received
by DHCP are supplemented by routing information about a
particular host.
• 2-5 < /% % 7;)!: The settings re-
ceived by DHCP are supplemented by routing information
about a particular network.
Note
When the DHCP lease expires or when the device is re-
started, the routes that consist from the combination of DH-
CP settings and those made here are initially deleted once
more from the active routing. If the DHCP is reconfigured
they are re-generated and re-activated.
12 Networking Teldat GmbH
224 bintec WLAN and Industrial WLAN