User manual

Field Description
• 7 # %D   (default
value): The function is not used for this VSS. This is useful if
clients are to switch between different radio cells with as little
delay as possible, e. g. with Voice over WLAN.
• E' 1;D  %: Preference is given to accept-
ing clients in the 2.4 GHz band.
•  1;D  %: Preference is given to accepting
clients in the 5 GHz band.
Fields in the menu MAC-Filter
Field Description
Access Control Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by selecting .
The function is disabled by default.
Allowed Addresses Use Add to make entries and enter the MAC addresses (MAC
Address) of the clients to be permitted.
Fields in the menu Advanced Settingsfor bintec W1003n, bintec W2003n, bintec
W2003n-ext and bintec W2004n
Field Description
Beacon Period Enter the time in milliseconds between the sending of two
beacons.
This value is transmitted in Beacon and Probe Response
Frames.
Possible values are  to (.
The default value is  ms.
DTIM Period Enter the interval for the Delivery Traffic Indication Message
(DTIM).
The DTIM field is a data field in transmitted beacons that in-
forms clients about the window to the next broadcast or multic-
ast transmission. If clients operate in power save mode, they
come alive at the right time and receive the data.
10 Wireless LAN Teldat GmbH
170 bintec WLAN and Industrial WLAN