User manual

Field Description
WPA2 Cipher Only for Security Mode = !"#!$ and !"
% and for WPA Mode = !"  and !"  !"

Select the type of encryption with which to apply WPA 2.
Possible values:
• " (default value): AES is used.
• "  /$6!: AES or TKIP is used.
Preshared Key Only for Security Mode = !"#!$
Enter the WPA password.
Enter an ASCII string with 8 - 63 characters.
Note
Change the default Preshared Key! If the key has not been
changed, your device will not be protected against unau-
thorised access!
EAP Preauthentifica-
tion
Only for Security Mode = !" %
Select whether the EAP preauthentification function is to be ac-
tivated. This function tells your device that WLAN clients, which
are already connected to another access point, can first carry
out 802.1x authentication as soon as they are within range.
Such WLAN clients can then simply connect over the existing
network connection with your device.
The function is activated by selecting .
The function is enabled by default.
Fields in the menu Client load balancing for bintec W1003n, bintec W2003n, bintec
W2003n-ext and bintec W2004n
Field Description
Max. number of clients
- hard limit
Enter the maximum number of clients that can be connected to
this wireless network (SSID)
10 Wireless LAN Teldat GmbH
168 bintec WLAN and Industrial WLAN