User manual
Field Description
The function is enabled by default.
ARP Processing Select whether the ARP Processing function should be activ-
ated. The ARP data traffic is reduced in the network by the fact
that ARP broadcasts that have been converted to ARP unicasts
are forwarded to IP addresses that are known internally. Uni-
casts are quicker and clients with an enabled power save func-
tion are not addressed.
The function is activated by selecting .
The function is disabled by default.
Please note that ARP Processing cannot be applied in con-
junction with the MAC bridge function.
WMM Select whether voice or video prioritisation via WMM (Wireless
Multimedia) is to be activated for the wireless network so that
optimum transmission quality is always achieved for time-critical
applications. Data prioritisation is supported in accordance with
DSCP (Differentiated Services Code Point) or IEEE802.1d.
The function is activated by selecting .
The function is enabled by default.
U-APSD Only for bintec W1003n, bintec W2003n, bintec W2003n-ext
and bintec W2004n
Select whether the Unscheduled Automatic Power Save Deliv-
ery (U-APSD) mode is to be enabled.
The function is activated by selecting .
The function is enabled by default.
Fields in the menu Security Settings
Field Description
Security Mode Select the Security Mode (encryption and authentication) for
the wireless network.
Possible values:
• 60 (default value): Neither encryption nor authentica-
10 Wireless LAN Teldat GmbH
166 bintec WLAN and Industrial WLAN