User manual

Field Description
Possible values:
• '   1;D: Your device runs in 2.4 (Mode 802.11b
and Mode 802.11g) or 5 GHz (Mode 802.11a/h).
•  1;D (default value): Your device runs in 5 GHz (Mode
802.11a/h).
• ' 1;D: Your device runs in 2.4 GHz (Mode 802.11b and
Mode 802.11g).
Usage Area Only for Operation Mode = " ), Client Mode =
6 and Operation Band = '   1;D or
 1;D
Possible values:
• 6#8 (default value)
• 6
• 8
IEEE 802.11d Compli-
ance
Only for Operation Mode = " )
Select how the country information is determined.
Possible values:
• : (default value): The system attempts to determine
the country information of the access point, otherwise the sys-
tem's own country information is used.
• 2: The system's own country information is used.
• : The country information of the access point is used.
Channel The number of channels you can select depends on the country
setting. Please consult the data sheet for your device.
Access Point Mode / Bridge Mode:
Configuring the network name (SSID) in Access Point mode
means that wireless networks can be logically separated from
each other, but they can still physically interfere with each other
if they are operating on the same or closely adjacent wireless
channels. So if you are operating two or more radio networks
close to each other, it is advisable to allocate the networks to
different channels. Each of these should be spaced at least four
Teldat GmbH
10 Wireless LAN
bintec WLAN and Industrial WLAN 151