User manual
Field Description
Client Mode
Only for Operation Mode = " )
Select the client connection mode to the access point.
Possible values:
• 6 (default value): In a network in infrastruc-
ture mode, all clients communicate with each other via access
points only. There is no direct communication between the in-
dividual clients.
• " ;: In ad-hoc mode, an access client can be used as
central interface between a number of terminals. In this way,
devices such as computers and printers can be wirelessly in-
terconnected.
Select the Channelto be used.
Operation Band Select the operation band and, where applicable, the usage
area of the wireless module.
For Operation Mode = " !, * or Operation
Mode = " ) and Client Mode = " ;
Possible values:
• ' 1;D 648 (default value): Your device is oper-
ated at 2.4 GHz (mode 802.11b and mode 802.11g), inside or
outside buildings.
• 1;D 6: Your device runs in 5 GHz (Mode 802.11a/h)
inside buildings.
• 1;D 8: Your device runs in 5 GHz (Mode
802.11a/h) outside buildings.
• 1;D 648: Your device is run with 5 GHz (Mode
802.11a/h) inside or outside buildings.
• 1;D 8: Only for so-called Broadband Fixed
Wireless Access (BFWA) applications. The frequencies in the
frequency range from 5,755 MHz to 5,875 MHz may only be
used in conjunction with commercial offers for public network
accesses and requires registration with the Federal Network
Agency.
For Operation Mode = " ) and Client Mode =
6
10 Wireless LAN Teldat GmbH
150 bintec WLAN and Industrial WLAN