User manual

Chapter 1 Introduction
The new generation access points are manufactured in an environmentally friendly way
and meet the RoHS directive. They support the latest WLAN technology and are designed
for use particularly in the professional environment.
Safety notices
The safety precautions brochure, which is supplied with your device, tells you what you
need to take into consideration when using your access point.
Installation
How to connect your device is shown in chapter Installation on page 6.
Configuration
Chapter Basic configuration on page 48 also tells you what preliminary tasks are necessary
for configuration. You will then be shown how you can access your device from a Windows
PC using a current web browser and how to make basic settings.
Password
If you are familiar with the configuration of Teldat devices and you want to get started right
away, all you really need to know is the preset user name and password.
User Name: 
Password: 
Note
Remember to change the password immediately when you log in to the device for the
first time. All Teldat devices are supplied with the same password, which means they
are not protected against unauthorised access until you change the password. How to
change the passwords is described in chapter Modify system password on page 56.
Workshops
Step-by-step instructions for the most important configuration tasks can be found in the
separate Application Workshop guide for each application, which can be downloaded
from the www.teldat.de website under Solutions.
Dime Manager
Teldat GmbH
1 Introduction
bintec WLAN and Industrial WLAN 1