User manual

Field Description
Possible values:  .. (. Default value: .
Inter-Byte Gap
Enter the time in ms since receiving the first character, which is
used as a trigger for data transmission.
The function is enabled with .
The function is disabled by default.
Possible values:  .. (. Default value: .
Fields in the Buffer menu.
Field Description
Clear Serial RX-Buffer Click the Clear button to clear the receive buffer.
Clear Serial TX-Buffer
Click the Clear button to clear the send buffer.
8.3 Relay
Devices of the WI series are fitted with a relay. The relay is open when at rest (i.e. unex-
cited/fault). You can choose whether the relay is manually controlled or used as an alarm
relay, coupled with the red error LED. When manually controlled, the state of the relay is
set during booting when the configuration is loaded.
8.3.1 Relay Configuration
In this menu, you can configure the Port Mode mode.
Fig. 62: Physical Interfaces->Relay->Relay Configuration
The Physical Interfaces->Relay->Relay Configurationmenu consists of the following
fields:
Fields in the Basic Parameters menu.
Teldat GmbH
8 Physical Interfaces
bintec WLAN and Industrial WLAN 135