User manual

Field Description
•  (default value)
• 
• C
• 
Data Bits
Select how many data bits should be sent in sequence for traffic
data.
Possible values:
•  (default value): Eight Data Bits are sent in sequence.
• C: Seven Data Bits are sent in sequence.
Parity
Select whether or not a parity bit should be used to identify
transmission errors.
Possible values:
• 2 (default value): No parity bit is used.
• 0: An even number of "1" bits is used to identify transmis-
sion errors.
• 8: An uneven number of "1" bits is used to identify trans-
mission errors.
Stop Bits
Stop bits terminate the data transmission of a transmission unit.
Choose whether a stop bit should be used or whether two stop
bits should be used.
Possible values:
•  (default value)
• 
Handshake
Choose how the recipient can continue the data transmission so
that no data is lost, if no other data can be processed.
Possible values:
• 2 (default value): The recipient is unable to continue the
data transmission.
• </4)/: The hardware handshake used controls the data
flow over the RTS and CTS lines.
Teldat GmbH
8 Physical Interfaces
bintec WLAN and Industrial WLAN 133