User manual

Chapter 8 Physical Interfaces
In this menu, you configure the physical interfaces that you have used when connecting
your gateway. The configuration interface only shows the interfaces that are available on
your device. In the System Management->Status menu, you can see a list of all physical
interfaces and information on whether the interfaces are connected or active and whether
they have already been configured.
8.1 Ethernet Ports
An Ethernet interface is a physical interface for connection to the local network or external
networks.
Note
In the ex works state, the Ethernet ports ETH1 and ETH2 are assigned to the standard
bridge group  , which is preconfigured as DHCP client and with the fallback IP Ad-
dress  and Netmask  .
8.1.1 Port Configuration
Your device allows you to configure the two Ethernet interfaces separately.
Fig. 59: Physical Interfaces->Ethernet Ports->Port Configuration
The menu Physical Interfaces->Ethernet Ports->Port Configuration consists of the fol-
lowing fields:
Teldat GmbH
8 Physical Interfaces
bintec WLAN and Industrial WLAN 129