User manual

Field Description
field. This file must be provided to the CA and the received
certificate must then be imported manually to your device.
• )! : The key is requested from a CA using the Simple Cer-
tificate Enrolment Protocol.
Generate Private Key Only for Mode = =
Select an algorithm for key creation.
<" (default value) and 7" are available.
Also select the length of the key to be created.
Possible values: , C, ', (, ', '.
Please note that a key with a length of 512 bits could be rated
as unsecure, whereas a key of 4096 bits not only needs a lot of
time to create, but also occupies a major share of the resources
during IPSec processing. A value of 768 or more is, however,
recommended and the default value is 1024 bits.
SCEP URL Only for Mode = )!
Enter the URL of the SCEP server, e.g. ht-
tp://scep.teldat.de:8080/scep/scep.dll
Your CA administrator can provide you with the necessary data.
CA Certificate Only for Mode = )!
Select the CA certificate.
• In ## 7- ##: In CA Name, enter the name of the CA
certificate of the certification authority (CA) from which you
wish to request your certificate, e.g. --. Your CA ad-
ministrator can provide you with the necessary data.
If no CA certificates are available, the device will first down-
load the CA certificate of the relevant CA. It then continues
with the enrolment process, provided no more important para-
meters are missing. In this case, it returns to the Generate
Certificate Request menu.
If the CA certificate does not contain a CRL distribution point
(Certificate Revocation List, CRL), and a certificate server is
7 System Management Teldat GmbH
122 bintec WLAN and Industrial WLAN