User manual

Field Value
tion is enabled.
LED Mode The feature is only for W1003n, W2003n, W2003n-ext and
W2004n available.
Select the lighting scheme of the LEDs.
Possible values:
•  (default value): Only the status LED flashes once per
second.
• : All LEDs show their standard behavior.
• 8: All LEDs are deactivated.
7.2.2 Passwords
Setting the passwords is another basic system setting.
Fig. 41: System Management->Global Settings->Passwords
Note
All Teldat devices are delivered with the same username and password. As long as
the password remains unchanged, they are not protected against unauthorised use.
Make sure you change the passwords to prevent unauthorised access to the device
If the password is not changed, under System Management->Status there appears
the warning: "System password not changed!"
7 System Management Teldat GmbH
86 bintec WLAN and Industrial WLAN