Installation guide

bintec RXL12100
04.12.2013
Subject to technical alterations
Page 9 / 11
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.teldat.org
Administration / Management
Configuration via serial interface Serial configuariton interface is available
ISDN remote maintenance Remote maintenance via ISDN dial-in with checking of the calling number. The ISDN remote
maintenance connection between two bintec elmeg devices can be encrypted.
ISDN remote maintenance A transparent mode enables transmissions of configurations and software updates respectively
GSM remote maintenance Remote maintenance via GSM login (external USB UMTS (3G) modem required)
Device discovery function Device discovery via SNMP multicast.
On The Fly configuration No reboot after reconfiguration required
SNMP SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access
list configurable
SNMP configuration Complete management with MIB-II, MIB 802.11, Enterprise MIB
Configuration export and import Load and save configurations, optional encrypted; optional automatic control via scheduler
SSH login Supports SSH V1.5 and SSH V2.0 for secure connections of terminal applications
HP OpenView Integration into Network Node Manager
CA Spectrum Integration into CA SPECTRUM Infrastructure Manager
XAdmin Support of XAdmin roll out and configuration managemant tool for larger router installations
(IP+ISDN+GSM)
Interfaces
USB 2.0 host USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see
www.bintec-elmeg.com)
Ethernet 8 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, all Ethernet ports can
be configured as LAN or WAN.
SFP Slot 2 x SFP slots for conventional optical 10/100/1000 Mbps Ethernet SFP module, all SFP ports can be
configured as LAN or WAN.
USB console USB console interface
Serial console Serial console interface / COM port (mini USB)
ISDN Basic Rate (BRI) 1 x BRI (TE), 2 B channels
Hardware
19 inch Mountable in 19 inch rack, incl. 19 inch rack mount kit
Realtime clock System time persists even at power failure for some hours.
Environment Temperature range: Operational 0°C to 40°C; storage -10°C to 70°C; Max. rel. humidity 10 - 95%
(non condensing)
Power supply Integrated wide range power supply 110-240V, with energy efficient swiching controller
Power consumption Max. 40 Watt, typ. 30 Watt