User manual
Field Description
Enter an IP address to be used as sender address for the ping
test.
Possible values:
• -3" (default value): The IP address of the interface
over which the ping is sent is automatically entered as sender
address.
• *)"!": Enter the desired IP address in the input field.
Status
Only for Event Type (#
Select whether Destination IP Address @", must be
(default value) or 0", in order to initiate the opera-
tion.
Interval
Only for Event Type (#
Enter the time in Seconds after which a ping must be resent.
The default value is seconds.
Trials
Only for Event Type (#
Enter the number of ping tests to be performed until Destina-
tion IP Address as 0", applies.
The default value is $.
Monitored Certificate
Only for Event Type 2!" /!
Select the certificate whose validity should be checked.
Remaining Validity
Only for Event Type 2!" /!
Enter the desired value for the remaining validity of the certific-
ate in percentage.
Fields in the Select time interval menu.
Field Description
Time Condition For Event Type ( only
First select the type of time entry in Condition Type.
Teldat GmbH
21 Local Services
bintec Rxxx2/RTxxx2 465