User manual

Field Description
Possible values:
• *" (default value): You enter a static IP address.
•   -##: Only for Connection Type = /'*.
Your device dynamically assigns an IP address to the remote
terminal.
•   -##: Only for Connection Type = /-2. Your
device is dynamically assigned an IP address.
Default Route Only for IP Address Mode =   -##
and *"
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with ,.
The function is disabled by default.
Create NAT Policy Only for IP Address Mode =   -##
and *"
Specify whether Network Address Translation (NAT) is to be ac-
tivated for this connection.
The function is enabled with ,.
The function is disabled by default.
IP Assignment Pool
(IPCP)
Only for IP Address Mode =   -##
Select an IP pool configured in the WAN->Internet +
Dialup->IP Poolsmenu.
Local IP Address Only for IP Address Mode = *"
Enter the WAN IP address of your device.
Route Entries Only for IP Address Mode = *"
Enter Remote IP Address and Netmask of the LANs for L2TP
partners and the corresponding Metric. Add new entries with
Add.
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 367