User manual

Field Description
OAM Flow Level Select the OAM flow level to be monitored.
Possible values:
• 9: (virtual channel level) The OAM settings are used for the
virtual channel (default value).
• 9 : (virtual path level) The OAM settings are used on the vir-
tual path.
Virtual Channel Con-
nection (VCC)
Only for OAM Flow Level = 9
Select the already configured ATM connection to be monitored
(displayed by the combination of VPI and VCI).
Virtual Path Connec-
tion (VPC)
Only for OAM Flow Level = 9
Select the already configured virtual path connection to be mon-
itored (displayed by the VPI).
Fields in the Loopback menu.
Field Description
Loopback End-to-End Select whether you activate the loopback test for the connection
between the endpoints of the VCC or VPC.
The function is enabled with ,.
The function is disabled by default.
End-to-End Send Inter-
val
Only if Loopback End-to-End is enabled.
Enter the time in seconds after which a loopback cell is to be
sent.
Possible values are  to .
The default value is 5.
End-to-End Pending
Requests
Only if Loopback End-to-End is enabled.
Enter the number of directly consecutive loopback cells that
may fail to materialise before the connection is regarded as in-
terrupted ("down"). Possible values are  to .
The default value is .
Teldat GmbH
17 WAN
bintec Rxxx2/RTxxx2 313