Datasheet
bintec RS232j-4G
29.11.2013
Subject to technical alterations
Page 7 / 11
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
Protocols / Encapsulations
MLPPPoE (Server/Client) Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support
MLPPPoE)
PPPoA Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL
IPoA Enables the easy routing of IP via ATM
DNS DNS client, DNS server, DNS relay and DNS proxy
DYN DNS Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for
establishing of VPN connections
DNS Forwarding Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
DHCP DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
Packet size controling Adaption of PMTU or automatic packet size controling via fragmentation
Quality of Service (QoS)
Policy based Traffic Shapping Dynamic bandwidth management via IP traffic shaping
Bandwidth reservation Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths
DiffServ Priority Queuing of packets on the basis of the DiffServ/TOS field
Layer2/3 tagging Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes
TCP Download Rate Control For reservation of bandwidth for VoIP connections
Redundancy / Loadbalancing
BRRP Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with
free selectable priority
BoD Bandwidth on Demand: dynamic bandwidth to suit data traffic load
Load Balancing Static and dynamic load balancing to several WAN connections on IP layer
VPN backup Simple VPN backup via different media. Additional enables the Teldat interface based VPN concept
the application of routing protocols for VPN connections.
Layer 2 Functionality
Bridging Support of layer 2 bridging with the possibility of separation of network segment via the
configuration of bridge groups
VLAN Support of up to 32 VLAN (Virtual LAN) for segmentation of the network in independent virtual
segments (workgroups)
Proxy ARP Enables the router to answer ARP requests for hosts, which are accessible via the router. That
enables the remote clients to use an IP address from the local net.










