Datasheet

bintec RS232j-4G
29.11.2013
Subject to technical alterations
Page 4 / 11
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.teldat.org
When developing DIME Manager, simple and efficient operation was the primary aim. It allows,
for example, software updates or configurations to be applied to individual devices or groups of
devices simply by drag and drop. DIME Manager recognises and manages new devices in the
network using SNMP multicasts, in other words independent of their current IP address.
Variants
bintec RS232j-4G (5510000330) IP Access Router; incl. ADSL modem (Annex B, ISDN and Annex J); 4G (LTE), 3.5G
(UMTS/HSPA+); 1x ISDN BRI; incl. IPSec (5 tunnels), certificates, HW encryption;
4+1 Gigabit Eth. switch; USB port; german and intern. version.
Features
DSL
ADSL ADSL over ISDN (ITU G.992.1 Annex B, ISDN - compatible to U-R2 connection of Deutsche Telekom,
G.Lite (ITU G.922.2)
ADSL 2 / ADSL 2+ ADSL over ISDN, Annex B and Annex J, compatible to the 'All IP' connection of Deutschen Telekom
(ITU G.992.3, ITU G.992.5)
ADSL Support of Dying Gasp
ATM Support of layer 1 protocol AAL5, PVCs, RFC 1483
ATM Support of up to 7 virtual channels (VC)
ATM Support of OAM F4/F5 line monitoring
ATM Support of ATM traffic management (COS - CBR, VBR, UBR)
LTE(4G) / UMTS(3G)
Supported standards Support of LTE 4G (download rate up to 100 Mbps, upload rate up to to 50 Mbps), UMTS 3.5G
(HSPA+), GPRS, Edge and GSM
LTE(4G) bands 800/900/1800/2100/2600 MHz
UMTS (3.5G) / EDGE - GPRS (2G)
bands
850/900/1800/1900/2100 MHz
ISDN
CAPI CAPI 2.0 with CAPI user concept (password for CAPI use)
ISDN protocols Euro-ISDN (Point-to-mulitpoint/Point-to-point), 1TR6 and other national ISDN protocols
ISDN auto-configuration Automatic recognition and configuration of ISDN protocols
ISDN leased lines Supported leased lines: D64S, D64S2, TS02, D64S2Y
B channel protocols Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)