Business WLAN Access Point bintec W2003n-ext • Dual concurrent radio for simulanteuos 2.4/5 GHZ operation • 802.11n 2x2 Mimo technolgy with up to 2x300 Mbps PHY rate • 200 mW transmitter power at 5 GHz band • Managed by integr. WLAN controller or stand-alone operation • Two Gigabit Ethernet ports with PoE (Power over Ethernet) • Four external RSMA antennas 2.
bintec W2003n-ext Business WLAN Access Point The bintec W2003n-ext is an 11n access point with two dual-band radio modules with external antennas, allowing simultaneous operation in both the 2.4 GHz and 5 GHz bands. A high-performance radio module enables up to 200 mW transm. power at 5 GHz band. Product description The device is equipped with external dual-band antennas. This makes it possible to operate both radio modules on the same frequency, e.g. two antennas operating at 2.
bintec W2003n-ext (5510000325) W2003-ext, WLAN Access Point with a dual concurrent radio module according 802.11abgn (2.4/5 GHz) Mimo 2x2, two Gigabit ETH, PoE, 4 ext. antennas, incl. wall/ceiling mounting, incl. WLAN Controller lic. for Master AP, shipm.
Wireless LAN (Radio 1) Receiver Sensitivity @ 2.4 GHz MSC0/8 -93 dBm; MSC1/9 -92 dBm; MCS2/10 -89 dBm; MCS3/11 -86 dBm; MCS4/12 -83 dBm; 802.11n 40 MHz MSC5/13 -81 dBm; MCS6/14 -78 dBm; MCS7/15 -76 dBm Receiver Sensitivity @ 5 GHz 6 Mbps -94 dBm;9 Mbps -93 dBm; 12 Mbps -92 dBm; 18 Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps 802.11a/h -85 dBm; 48 Mbps -82 dBm; 54 Mbps -80 dBm Receiver Sensitivity @ 5 GHz MSC0/8 -94 dBm; MSC1/9 -92 dBm; MCS2/10 -91 dBm; MCS3/11 -87 dBm; MCS4/12 -84 dBm; 802.
Wireless LAN (Radio 1) DTIM Period Adjustable Multi SSID Up to 8 service sets per radio module, with virtual access points and own MAC address per SSID Broadcast SSID On/off switchable Power management for clients Registering of up to 250 clients per radio module simultaneously in access point mode. Default is 32 clients. Country-specific settings Channel settings according regulatory domain (802.11d) permitted RTS/CTS RTS/CTS threshold adjustable Wireless LAN (Radio 2) WLAN Standards 802.
Wireless LAN (Radio 2) Receiver Sensitivity @ 2.4 GHz 1 Mbps -95 dBm; 2 Mbps -95 dBm; 5,5 Mbps -93 dBm; 11 Mbps -92 dBm; 6 Mbps -95 dBm; 9 Mbps 802.11b/g -94 dBm; 12 Mbps -93 dBm; 18 Mbps -91 dBm; 24 Mbps -87 dBm; 36 Mbps -84 dBm; 48 Mbps -83 dBm; 54 Mbps -81 dBm Receiver Sensitivity @ 2.4 GHz MSC0/8 -95 dBm; MSC1/9 -93 dBm; MCS2/10 -92 dBm; MCS3/11 -88 dBm; MCS4/12 -85 dBm; 802.11n 20 MHz MSC5/13 -82 dBm; MCS6/14 -80 dBm; MCS7/15 -78 dBm Receiver Sensitivity @ 2.
Security WIDS (Wireless Intrution Neighbor AP Detection: detection of neighbor Aps with possible influence on performance of own Detection System) network. By detected intrusion: SNMP trap or email alert. This functionality requires WLAN Controller. VLAN Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration according IEEE 802.1q; up to 32 VLANs supported.
Maintenance External reporting: eMail alert Automatic eMail alert by definable events (predefined events: new neighbor AP found, new rogue AP found, new slave AP found, managed AP failed) External reporting: SNMP traps Supported Monitoring: Monitoring: Internal Log Output via web-based configuration interface (http/https); filter: subsystem, level, message Monitoring: Interfaces Statistic information of all physical and logical interfaces Monitoring: WLAN Detailed displays for radio, VSS.
Hardware Power consumption < 8.7 Watt Environment Temperature operating: 0°C to 40°C; storage: -10°C to 70°C; rel. humidity 10 to 95% (non condensing) Accessoires Pick-up Service / Warranty Extension Service Package 'small' (5500000810) Warranty extension of 3 years to a total of 5 years, including advanced replacement for Teldat products of the category 'small'. Please find a detailed description as well as an overview of the categories on www.teldat.de/servicepackages. Antennas ANT-RSMA.
