Business WLAN Access Point bintec W2003n • Dual concurrent radio for simultaneous 2.4/5 GHZ operation • 802.11n 2x2 Mimo technolgy with up to 2x300 Mbps PHY rate • 200 mW transmitter power at 5GHz band • Managed by integr. WLAN controller or stand-alone operation • Two Gigabit Ethernet ports with PoE (Power over Ethernet) • Integrated Mimo antennas for 2.
bintec W2003n Business WLAN Access Point The bintec W2003n is an 11n access point with two single-band radio modules, allowing the device to operate in both the 2.4 GHz and 5 GHz bands simultaneously. A high-performance radio module enables up to 200 mW transmission power at 5 GHz band. Product description The unit is a perfect match for indoor wireless infrastructures designed to provide access over both frequencies. Smartphones, tablets, and older notebooks can connect to the the 2.
seamless coverage throughout the network. And seamless coverage is a must if you are, for instance, implementing a VoWLAN (Voice over WLAN) solution or using wireless barcode scanners for logistics applications. The W2003n gives you green IT right out of the box with its automatic energy-saving features. If no client is connected, the AP turns off any circuits not currently in use, downshifting to mimo 1x1. The Gigabit Ethernet ports support the energy-saving 802.
bintec W2003n (5510000324) W2003n, WLAN Access Point with a dual concurrent radio module according 802.11abgn (2.4/5 GHz) Mimo 2x2, 2 Gigabit ETH, PoE, integr. Antennas, incl. wall/ceiling mounting, incl.
Hardware Standards and certifications R&TTE Directive 1999/5/EG; EN 60950-1 (IEC60950); EN 300 328; EN 301 489-17; EN 301 489-1; EN 301 893; EN 60601-1-2 (medical electrical devices - Part 1-2) LAN / WAN 2 x 10/100/1000 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X WLAN One radio module IEEE 802.11bgn Mimo 2x2 and a second high-performance radio module IEEE 802.11an Mimo 2x2 with 200 mW transmission power allow simultaneous operation at 2.4 and 5 GHz.
Wireless LAN (Radio 1) Frequency bands 2.4 GHz 2.4 GHz Indoor/Outdoor (2412-2484 MHz) max. 100 mW EiRP (for Germany) indoor/outdoor (EU) Data rates for 802.11b,g (2.4 11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation) GHz) Data rates for 802.11n, 20 MHz MSC0-15 allow up to 150 Mbps PHY rate at 20 MHz channel bandwidth, 2 streams, Short guard channel bandwidth intervall Data rates for 802.
Wireless LAN (Radio 2) Tx Power @ 5 GHz 802.11n 40 MSC0/8 14 dBm; MSC1/9 14 dBm; MCS2/10 14 dBm; MCS3/11 14 dBm; MCS4/12 14 dBm; MSC5/14 Mhz 13 dBm; MCS6/14 11 dBm; MCS7/15 9 dBm Frequency bands 5 GHz indoor 5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed. This information is related to the (EU) permitted transmission power in Germany. The permitted transmission power may vary in other countries. Frequency bands 5 GHz outdoor 5 GHz outdoor (5470-5725 MHz) max. 1000 mW EiRP allowed.
Security Encryption WEP/WPA WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise IEEE802.11i authentication and 802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption encryption, AES encryption, 802.1x/EAP Access control list (ACL) MAC address filter for WLAN clients (white list) and dynamic and static blacklist.
Maintenance Configuration a. maintenance: SSH available, HTTPS, Telnet protected against 'bruce force attacks' Secure configuration Configuration a. maintenance: Load and save of configurations; save configuration optionally encrypted; optional, automatic Configuration export and import controlled via scheduler Configuration a. maintenance: No restart is required after the configuration has been changed. On the fly configuration Configuration a.
Pick-up Service / Warranty Extension Service Package 'small' (5500000810) Warranty extension of 3 years to a total of 5 years, including advanced replacement for Teldat products of the category 'small'. Please find a detailed description as well as an overview of the categories on www.teldat.de/servicepackages.
