.11n WLAN Access Point bintec W1003n • Single Radio for 2.4 GHz or 5 GHz operation • 802.11n 2x2 Mimo technolgy with up to 300 Mbps PHY rate • Managed by integr. WLAN controller or stand-alone operation • One Gigabit Ethernet port with PoE (Power over Ethernet) • Subtle and unremarkable design for wall or ceiling mounting • Integrated Mimo antennas for 2.
bintec W1003n .11n WLAN Access Point The bintec W1003n is an 11n access point with one dual-band radio module. The unit is a perfect match for indoor wireless infrastructures designed to provide a single frequency (2.4 or 5 GHz). Product description The bintec W1003n access point has three different operating modes. You can operate the device as a stand-alone access point or manage it from a central bintec WLAN Controller.
Variants bintec W1003n (5510000321) W1003n, WLAN Access Point with a single radio module according 802.11abgn (2.4/5 GHz) Mimo 2x2, one Gigabit ETH, PoE, integrated antennas, incl. wall and ceiling mounting, incl. WLAN Controller license for Master AP, shipment without 100-240V wall adapter Features Software Client Management Client overload protection (to much clients) and shifting of clients to other APs, if threshold is reached.
Software Buffer pool For cushioning of peaks WMM 802.11e QoS Data prioritization for TOS data, 802.11e/WMM WMM 802.11e power save Support of active WLAN clients, which support 802.11e power save.
Wireless LAN (Radio 1) Frequency bands 5 GHz outdoor 5 GHz outdoor (5470-5725 MHz) max. 1000 mW EiRP allowed. This information is related to the (EU) permitted transmission power in Germany. Data rates for 802.11b,g (2.4 11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation) GHz) Data rates for 802.11a,h (5 GHz) 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation) Data rates for 802.
Security Encryption WEP/WPA WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise IEEE802.11i authentication and 802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption encryption, AES encryption, 802.1x/EAP Access control list (ACL) MAC address filter for WLAN clients (white list) and dynamic and static blacklist.
Maintenance Configuration a. maintenance: SSH available, HTTPS, Telnet protected against 'bruce force attacks' Secure configuration Configuration a. maintenance: Load and save of configurations; save configuration optionally encrypted; optional, automatic Configuration export and import controlled via scheduler Configuration a. maintenance: No restart is required after the configuration has been changed. On the fly configuration Configuration a.
Hardware Power supply External wall power supply 230V / 9V DC, 1,3A, with high efficient switching power supply (The wall adapter is a accessory and not include the shipment). PoE Power-over-Ethernet according IEEE 802.3af, compatible with 802.
