Datasheet

bintec RS230aw
29.10.2013
Subject to technical alterations
Page 5 / 13
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [e-mail] - www.teldat.org
Wireless LAN
Automatic Rate Selection (ARS) Available
Transmission rate Automatic fallback or fixed transmission rate selectable
Data rates for 802.11a,h (5 GHz) 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11n (2.4 / 5
GHz)
MSC0-15 enables physical rates up to 150 Mbps at 20 MHz channels bandwidth, 2 streams, short
guard interval; MSC0-15 enables physical data rates up to 300 Mbps at 40 MHz channels
bandwidth, 2 streams, short guard interval
Roaming (access point mode) Seamless roaming with IAPP (artem Inter Access Point Protocol)
Number of spatial streams
(802.11n)
1 or 2
Broadcast SSID On/off switchable
Broadcast SSID Data prioritization for TOS data, 802.11e/WMM
WMM 802.11e Power Save Support of active WLAN clients, which support 802.11e power save
Country-specific settings Channel settings according regulatory domain (802.11d) permitted.
WDS Wireless Distribution System: Include high security TKIP and AES, interoperable with W1002n,
WIx40, WIx65n, RS120wu, RS232aw, RS232bw and RS232jw
TPC TPC (transmission power control): For 5 GHz, automatic reduction of transmission power according
EN301893
Data rates for 802.11b,g (2.4
GHz)
11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Fast roaming 802.1x (access
point mode)
Pre authentication and PMK caching allows fast roaming by 802.1x encryption
Power Managment for Clients Registering of up to 250 clients simultaneously in access point mode.
Buffer pool For cushioning of peaks
Bandwidth (802.11n) 20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel)
Short guard interval (802.11n) On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns
RTS/CTS RTS/CTS threshold adjustable
DTIM Period Adjustable
VLAN Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration
according IEEE 802.1q; up to 32 VLANs supported.
Multi SSID Depending on the complexity of configuration up to 8 service sets per radio module, with virtual
access points and own MAC address per SSID.
Inter Cell Repeating Inter traffic blocking for public hot spot (PHS) applications for preventing of communication radio
client to radio client in a single radio cell.
WLAN Electric Characteristics
Receiver Sensitivity @ 2.4 GHz
802.11b/g
1 Mbps -91 dBm; 2 Mbps -90 dBm; 5.5 Mbps -89 dBm; 11 Mbps -88 dBm; 6 Mbps -90 dBm;9 Mbps
-89 dBm; 12 Mbps -88 dBm; 18 Mbps -86 dBm; 24 Mbps -83 dBm; 36 Mbps -80 dBm; 48 Mbps -76
dBm; 54 Mbps -74 dBm