Outdoor Access Point with two radio modules bintec WI2065n • WLAN according IEEE 802.11n, compatible with .11agbh • With two radio modules, dual band radio • Up to 4000mW transmission power in 5.8 GHz band allowed • Operation as access point, bridge, WDS, client • PoE or 24V DC; opt.
bintec WI2065n Outdoor Access Point with two radio modules The W2065n is an outdoor (IP65) 11n access point with two dual-band radio modules. It can be used for a wide range of applications such as creating line-of-site radio links and can be mounted outdoors without any additional modifications.
outdoor storage facility, e.g. to connect your wireless hand scanners to your enterprise resource management system, the bintec WIx065n series devices will meet your requirements and help you overcome many obstacles. When setting up a hotspot outdoors, the WIx65n devices integrate seamlessly into the bintec hotspot solution. If several access points are required to illuminate a site, e.g. a campsite or highway parking lot, the bintec WI2065n comes into use.
Features Operation Modes WLAN disabled In this operation mode the device is a powerful 2-port VPN router WLAN access point WLAN access point with VPN router functionalities WLAN bridge Point-to-point and point-to-multipoint mode (up to 8 links) WLAN client Transparent client for direct connection of Ethernet devices Wireless LAN WLAN standards 802.11n (Mimo 2x3); 802.11b; 802.11g; 802.11a; 802.11h Frequency bands 2.4 GHz 2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP.
Wireless LAN Receiver Sensitivity @ 5 GHz 6 Mbps -88 dBm; 9 Mbps -87 dBm; 12 Mbps -86 dBm; 18 Mbps -84 dBm; 24 Mbps -82 dBm; 36 802.11a/h Mbps -78 dBm; 48 Mbps -74 dBm; 54 Mbps -73 dBm Receiver Sensitivity @ 5 GHz MSC0 -88 dBm; MSC1 -85 dBm; MCS2 -83 dBm; MCS3 -81 dBm; MCS4 -78 dBm; MSC5 -74 dBm; 802.
Security Encryption WEP/WPA WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2 enterprise IEEE802.11i authentication and 802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption encryption, AES encryption, 802.1x/EAP Access control list (ACL) MAC address filter for WLAN clients VLAN Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration according IEEE 802.
Software Bridge: point-to-point / Point-to-point connection between two access points, point-to-multipoint connection between up to point-to-multipoint eight partners access points Bridge Full remote configuration: Protocol with encrypted transmission. RTS/CTS threshold adjustable. Operating channels: According to the regulatory domain. Transmit speed: Auto fallback or selectable fixed rate. Bridge link test Via the link test the quality of a bridge link can be measured.
Maintenance External reporting: eMail alert Automatic eMail alert by definable events External reporting: SNMP traps Supported External reporting: Activity Sending of information to a PC on which Brickware is installed monitor Monitoring: Internal Log Output via web-based configuration interface (http/https); filter: subsystem, level, message Monitoring: IPSec Displayed: IPSec tunnels and IPSec statistics; output via web-based configuration interface (http/https) Monitoring: Interfaces Statistic
Hardware Power supply Power requirements: 24V +/-30% max. 1 A; Operation with two redundant power supplies supported; Operation is indepent of the Polarity of the power supply; Power supply unit is not include in the delivery PoE Power-over-Ethernet according IEEE 802.
Add-ons Pole Mounting WI-65 Series (5020591700) Pole Mounting Kit for WI-65 Series APs Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25 E-Mail: info@teldat.de - www.teldat.org bintec WI2065n 11.12.
