User Guide

®
Telcare
®
Blood Glucose Monitoring System
Quick Reference
Guide
1
.
2
Turn on the
glucose meter
using the power
button. Slight
delays may occur
when meter
powers on.
Wash your hands
and testing site
with warm water
and soap. Dry your
hands well
Before first use,
charge the glucose
meter for at least 3
hours with the AC
charger included in
your kit. Follow
control solution
instructions on
Page 8 of the
BGM User Manual.
Clean and disinfect
your lancing device
after every use. Clean
and disinfect your
meter at least once a
week. PLEASE REFER
TO DETAILS IN THE
MANUAL.
3
5 6
4
Insert a new lancet into the lancing
device and twist off its plastic cap.
IM PORTANT:
The lancing device is intended
for single patient use.
Using your thumb, push the sliding
button back. You will hear a click,
indicating that the lancet carrier is
locked into position.
When the Insert Test Strip screen
appears, insert the Telcare test strip.
Continue to push the strip in until
Apply Blood appears.
Adjust the cap to your desired
puncture depth level.
9 10
7 8
Your test result will display.
Highlight a reading tag using the
down button. Enter the reading tag
by pressing the middle button.
Make sure the Apply Blood screen
is displayed. Touch the tip of the test
strip to the blood drop until the end
is filled.
Down
(Please refer
to User Manual
page 9 for
button location.)
Middle
Position the end of the
device against the side of the
ngertip. Press the trigger
button to actuate the lancet.
11 12
Remove test strip to send data to
MyTelcare.com.
IF NO DATA CONNECTION:
1. Move to different location to get
a cell signal,
2. Go to History,
3. Highlight unsent reading,
4. Press middle side button to send.
Log in to MyTelcare.com to:
• View blood glucose readings
• Invite caregivers
• Set up messaging options
• Create target zones
• Print data
See your Telcare BGM User Manual and Telserve
User Manual located at MyTelcare.com
for full instructions.
Call 888-666-4530 (US) or
(1) [phone] (Int ernational)
(9AM - 9PM EST, M -F)
with any questions or comments.
For In Vitro Use Only
Telcare, LLC
150 Baker Avenue Extension
Suite 300
Concord, MA 01742, USA
ART – 048 Rev. 3
(Images are for reference only.)