User Guide

ManualsBrandsTelaire ManualsElectricalTelaire 7001 Standard CO2/Temperature Monitor

Telaire 7000 Series are Telaire

products. Telaire has joined other

GE high-technology sensing

businesses under a new name—

GE Industrial, Sensing.

Handheld Indoor Air

Quality (IAQ) Monitors

Telaire

7000

Series

Sensing

Applications

• Identify areas with low or substandard ventilation.

• Identify hidden energy savings in overventilated

spaces.

• Determine if ventilation is a factor in air quality

complaints.

• Locate the presence of combustion fumes from

vehicles and appliances.

• Use as a reference to calibrate wall mounted CO

sensors.

Features

• Patented dual beam, Absorption Infrared

™

gas sensor

ensures long term stability and durability.

• Record temperature, CO

, RH and graph recorded data

with supplied software (Model 7001D).

• Large, easy-to-read display. Temperature displayed in

°F or °C. CO

displayed in ppm. Easily adjusted for

altitude changes.

• Fast, simple calibration using external port and display.

Calibrate with ambient air or bottled gas.

• Calibrate, set elevation, change °F or °C using on-board

controls or optional computer interface (UIP kit

model 2072)

• Flip out stand for desktop monitoring.

• Voltage output via RJ45 connector provides easy

interface to most data loggers.

• Plug in AC power adaptor.

• Operates for up to 80 hours on four AA alkaline

batteries (not included).

• Displays cfm-per-person ventilation rate based on CO

inside outside differential reading.

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Summary of content (4 pages)

PAGE 1
GE Sensing Applications • Identify areas with low or substandard ventilation. • Identify hidden energy savings in overventilated spaces. 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com • Large, easy-to-read display. Temperature displayed in °F or °C. CO2 displayed in ppm. Easily adjusted for altitude changes. • Fast, simple calibration using external port and display. Calibrate with ambient air or bottled gas.
PAGE 2
GE Sensing Telaire 7001 Telaire 7000SK Equipped with Telaire's patented dual beam Absorption Infrared™ technology, the Telaire 7001 is an easy-to-use CO2/temperature monitor designed for use in residential or commercial applications.
PAGE 3
GE Sensing 7000 Series Specifications Method Dual Beam Absorption Infrared™ Sample Method Diffusion or flow through (50 to 100 ml/min) Pressure Dependence 0.13% of reading per mmHg (corrected via user input for elevation) Response Time <60 seconds for 90% of step change Warm-Up Time <60 seconds at 72°F (22°C) Calibration Interval 12 months, offset adjustment using single gas at 0 to 1000 ppm CO2. Full factory calibration available. Display_LCD Independent CO2 and temperature readings.
PAGE 4
GE Sensing Digital Output RS232 for use with Telaire CO2View graphing software Wiring Connection One RJ45 to connector dual analog output plus digital output Power Supply Battery Type Four AA batteries (not included) Battery Operation 80 hours (alkaline) 7000 Series Accessories/ Ordering Information 2070 Cable Voltage output cable, includes two pigtail leads for connecting to third party devices. 2075 Calibration Kit Comes with regulator, tubing and gas. The kit can perform up to 20 calibrations.