User's Manual

SETUP Menu
3 Ć224
AWG2021 User Manual
! 
 !  
  
 ! !
   
 "

 ! ! "

#  "



# 

Figure 3 Ć158: Multiplying CH1 Waveform by an External Waveform
Table 3-14 shows the amplitudes for the output signals relative to the external
modulation signals.
Table 3Ć14: Output Signal Amplitude Relative to External Modulation Signal
External Modulation Signal Output Signal
    "!
    "!
  
100% amplitude modulation is possible with ±1 V input.
. When the external modulation signal is overmodulated 1 V or more, the
output will exceed 5 Vp-p and the signal may be distorted.
The maximum signal that can be input to the CH1 AM IN connector is ±5 V: the
input impedance is 10 kW.