User's Manual
EDIT Menu
3 Ć114
AWG2021 User Manual
Sample Pattern Conversion. When Source Data Pattern is unaffected by other
conditions
Initial Src 0
Initial Code 0
Out[1/0] High/Low
Source Data Pattern Converted Code
In the case of the above conversion, the data will be as follows:
!
"
!
. 3 of 30 in pattern 11 starting from position 0 is the inverse of the 0 in the
Source Data Pattern at position –1.
2 of 20 in pattern 10 starting from position 4 is the inverse of result 1 at position
3.
2 of 20 in pattern 10 starting from position 6 is the inverse of result 0 at position
5.
When Out[1/0] is set to Invert/Keep for the same table, the data will be as
follows:
!
"
" "!
!