User's Manual

EDIT Menu
AWG2021 User Manual
3 Ć47
3
1
2
Figure 3 Ć26: Menu Display When Draw... is Selected
(1) Point Cursor            
           
(2) XĆY Coordinate Axis            
         
           
 
(3) Button Operations
Pressing the CURSOR button toggles the active vertical bar cursor from left to
right and back again. Pressing the VALUE button toggles the direction in which
the point cursor can be moved from up-down to left-right and back again.
1. Move the left and right vertical bar cursors to define the area within which
the waveform will be drawn and then select Draw... from the side menu.
The point cursor will appear in the middle of the vertical axis between the
left and right vertical bar cursors.
2. Press VALUE button on the front panel.