User's Manual

SimPal-S460 User Manual
17
 Insert the temperature sensor into the I/O port until it is seized.
Power on:
1. Plug the SimPal-S460 in an AC power socket.
The GSM LED will be flashing slowly for about 15 seconds, and
turn
to slowly breathe status, breathe LED means the socket
already
register GSM network, its ready to working.
The socket default power output is OFF.
2. Insert the plug of electronic appliance in the SimPal-S460 electrical outlet.
3. M button (See 5 on Figure1) can be pressed for about one second to switch on or off
the socket output.
After adding user numbers to the socket, users can send SMS command to control
the power supply output.
֠ Note:
1. If the GSM indicator light is flash slowly all the time, which imply the SIM card working
abnormally, all functions of this
socket
are invalid.