User manual

TekSmartLab™ TBX3000A, TSL3000B User Manual
Monitoring and Controlling Instruments on a Bench
Click one of the benches, and you will enter the instrument monitoring/controlling screen
as shown below.
Figure 81: Instrument monitoring/controlling screen
The parameters and waveform of the instruments on the bench are displayed
automatically on this screen, and you can change the parameters manually.
1. Click , to return to the bench configuration screen for that bench.
2. The parameters of the instruments that you can configure are displayed on this
screen. You can move to the previous bench and the next bench by clicking the left
and right arrows.
NOTE:
After you modify instrument parameters, you should press Enter on your keyboard to
save the modification. If the input parameters exceed the predefined value range, an error
message will pop up.
3. Click to set more parameters of the instrument on the bench (in this example, the
oscilloscope).
64 TekSmartLab User Manual