User manual

TekSmartLab™ TBX3000A, TSL3000B User Manual
Configuring instruments
The process of instrument configuration is demonstrated by the following oscilloscope
configuration screen.
Figure 74: Oscilloscope configuration screen
1. On the oscilloscope configuration screen, a waveform is displayed only after the
instrument configuration of a bench is captured (see Figure 75).
2. Choose a bench that has the instrument you wish to configure by selecting the
appropriate icon. If a bench is chosen, the icon will be displayed as dark grey. (refer
to Configuring Benches
)
Figure 75: Oscilloscope configuration screen (configuration captured)
60 TekSmartLab User Manual