Datasheet

Oscilloscopes
•
www.tektronix.com/tps2000
5
Digital Storage Oscilloscopes
TPS2012
•
TPS2014
•
TPS2024
Acquisition Modes
Peak Detect – High frequency and random glitch
capture. Captures glitches as narrow as 12 ns
typical using acquisition hardware at all time/div
settings from 5 µs/div to 50 s/div.
Sample – Sample data only.
Average – Waveform averaged, selectable: 4, 16,
64, 128.
Single Sequence – Use the Single Sequence
button to capture a single triggered acquisition
sequence at a time.
Scan/Roll Mode – At acquisition time base
settings of ≥100 ms/div.
Trigger System (Main Only)
Trigger Modes – Auto, Normal, Single Sequence.
Trigger Types
Edge (rising or falling) – Conventional level-driven
trigger. Positive or negative slope on any channel.
Coupling selections: AC, DC, Noise Reject, HF Reject,
LF Reject.
Video – Trigger on all lines or individual line,
odd/even or all fields from composite video, or
broadcast standards (NTSC, PAL, SECAM).
Pulse Width (or Glitch) – Trigger on a pulse width
less than, greater than, equal to, or not equal to a
selectable time limit ranging from 33 ns to 10 sec.
Trigger Source
2-channel models – CH1, CH2, Ext, Ext/5, Ext/10.
4-channel models – CH1, CH2, CH3, CH4, Ext,
Ext/5, Ext/10.
Trigger View
Displays trigger signal while trigger view button
is depressed.
Trigger Signal
Frequency Readout
Provides a frequency readout of the trigger source
with 6-digit resolution.
Cursors
Types – Voltage, Time.
Measurements – ∆T, 1/∆T (frequency), ∆V,
dv/dt*
3
, di/dt*
3
.
*
3
Requires TPS2PWR1 power application package.
Measurement System
Automatic Waveform Measurements – Period,
Frequency, +Width, –Width, Rise time, Fall time,
Max, Min, Peak-to-Peak, Mean, Cycle RMS.
Waveform Processing
Operators – Add, Subtract, Multiply, FFT.
FFT – Windows: Hanning, Flat Top, Rectangular;
2048 sample points.
Sources –
2-channel models: CH1 – CH2, CH2 – CH1,
CH1 + CH2, CH1 x CH2.
4-channel models: CH1 – CH2, CH2 – CH1,
CH3 – CH4, CH4 – CH3, CH1 + CH2, CH3 + CH4,
CH1 x CH2, CH3 x CH4.
Autoset Menu – Single-button, automatic setup
of all channels for vertical, horizontal and trigger
systems, with undo autoset.
Autorange – Allows the user to adjust waveforms
on the oscilloscope screen and change test points
without resetting the oscilloscope.
Display Characteristics
Display – 1/4 VGA, passive color LCD with color
on black background with adjustable multi-level
contrast and brightness controls.
Interpolation – Sin(x)/x.
Display Types – Dots, vectors.
Persistence – Off, 1 sec, 2 sec, 5 sec, infinite.
Format – YT and XY.
I/O Interface
Printer Port (standard) – Centronics-type Parallel.
Graphics File Formats – TIFF, PCX (PC Paint
Brush), BMP (Microsoft Windows), EPS
(Encapsulated Postscript) and RLE.
Printer Formats – Bubble Jet, DPU-411,
DPU-412, DPU-3445, Thinkjet, Deskjet, Laser
Jet, Epson Dot (9- or 24-pin), Epson C60,
Epson C80.
Layout – Landscape and Portrait.
RS-232 Port (standard) – 9-pin DTE.
RS-232 Programmability – Full talk/listen modes.
Control of all modes, settings and measurements.
Baud rate up to 19,200.
Autoset Menu for Multiple Signal Types
Signal Type Autoset Menu Choices
Square wave Single-cycle, Multi-cycle, Rising or Falling Edge
Sine Wave Single-cycle, Multi-cycle, FFT Spectrum
Video (NTSC, PAL, SECAM) Video (NTSC, PAL, SECAM) Field: All, Odd, or Even Line:
All or Selectable Line Number
Nonvolatile Storage
Nonvolatile Storage Standard (with CompactFlash Mass Storage)
Reference Waveform Display Two 2500 point reference waveforms
Waveform Storage 96 or more reference waveforms per 8 MB
Setups 4000 or more front panel setups per 8 MB
Screen Images 128 or more screen images per 8 MB
(the number of images depends on file format selected)
Save All 12 or more Save All operations per 8 MB. A single
Save All operation creates 2 to 9 files (setup, image,
plus one file for each displayed waveform)