Datasheet

ManualsBrandsTEKTRONIX ManualsTest Leads & ProbesProbe Scoop-proof 800 MHz 50:1 2500 V

Passive High-voltage Probes

P5100A • TPP0850 • P5122 • P5150 • P6015A Data Sheet

P5100A

Features & Beneﬁts

P5100A

DC to 500 MHz

2500 V

Peak

,1000V

RMS

CAT II

100X with Readout Coding

UL3111-1, EN61010-1, IEC61010-2-031, CSA1 010.1, CSA1010.2.031

7 to 30 pF Compensation Range

TPP0850

DC to 800 MHz

2500 V

Peak

,1000V

RMS

CAT II

50X with Readout Coding

Designed for use with the MSO/DPO5000 and MSO/DPO4000B Series

Oscil

loscopes

P5122

For T PS2000 and THS3000 Series Oscilloscopes

DC to 200 MHz

1000 V

RMS

CAT II when DC-coupled*

Floatable up to 600 V

RMS

CAT II

100X

IEC61010-031

P5150

For T PS2000 and THS3000 Series Oscilloscopes

DC to 500 MHz

2500 V

Peak

, 1000 V

RMS

CAT II

Floatable up to 600 V

RMS

CAT II or 300 V

RMS

CAT III

Preferred Probe for Ripple Measurements

50X

10 to 25 pF Compensation Range

UL61010B-2-031, EN610 10-2-031, IEC61010-2-031, C SA61010.2.031

P6015A

HighVoltage–20kVDC/40kVPeak(100msPulseWidth)

HighBandwidth–DCto75MHz

Silicone Dielectric

Optional 1000X Readout Coding

Wide Compensation R ange (7 to 49 pF)

avy-duty Versatile Ground Lead and Alligator Clip

Summary of content (4 pages)

PAGE 1
Passive High-voltage Probes P5100A • TPP0850 • P5122 • P5150 • P6015A Data Sheet P5122 For TPS2000 and THS3000 Series Oscilloscopes DC to 200 MHz 1000 VRMS CAT II when DC-coupled*1 Floatable up to 600 VRMS CAT II 100X IEC61010-031 P5150 For TPS2000 and THS3000 Series Oscilloscopes DC to 500 MHz P5100A 2500 VPeak, 1000 VRMS CAT II Features & Benefits Floatable up to 600 VRMS CAT II or 300 VRMS CAT III P5100A DC to 500 MHz Preferred Probe for Ripple Measurements 50X 2500 VPeak, 1000 VRMS CAT II 10 to
PAGE 2
Data Sheet Applications Power Supply Design Design Motor Drive Electronic Ballast Power Semiconductors Switch Mode Control UPS Systems Power Converters *1 The P5122 probe should not be used on the TPS2000 Series oscilloscopes for AC-coupled measurements on signals with greater than 300 V DC offset. The P5150 is the recommended probe for measuring ripple on high-voltage DC supplies. P5100A High-voltage Probe TPP0850 The P5100A is a low input capacitance high-voltage probe (2.
PAGE 3
Passive High-voltage Probes — P5100A • TPP0850 • P5122 • P5150 • P6015A Characteristics P5100A/TPP0850/P5122/P5150/P6015A Probe Nominal Length Attenuation Bandwidth Rise Time (Typical) Loading P5100A 2m 100X 500 MHz <700 ps 40 MΩ / 2.5 pF TPP0850 1.3 m 50X 800 MHz <525 ps 40 MΩ / 1.8 pF P5122 P5150 1.2 m 2m 100X 50X 200 MHz 500 MHz 2.2 ns <700 ps 100 MΩ / 4.0 pF 40 MΩ / 3.8 pF P6015A P6015A Opt. 1R 3m 3m 1000X 1000X 75 MHz 75 MHz 4.0 ns 4.0 ns 100 MΩ / 3 pF 100 MΩ / 3 pF Max.
PAGE 4
Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200 Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 301