Datasheet

Passive High Voltage Probes
P5100A-TPP0850-P5122-P5150-P6015A Datasheet
Safe high voltage probe solutions for ground-referenced voltage testing. It
is critical to safely and accurately capture real-time signal information from
"elevated" or "floating" voltage systems. Our portfolio of high voltage probes
provides the safety you need for single-ended, differential or isolated
measurements.
Key performance specifications
P5100A
DC to 500 MHz
2500 V
Peak
, 1000 V
RMS
CAT II
100X with readout coding
TPP0850
DC to 800 MHz
2500 V
Peak
, 1000 V
RMS
CAT II
50X with readout coding
Designed for use with the MSO/DPO5000 and MSO/DPO4000B
Series Oscilloscopes
P5122
DC to 200 MHz
1000 V
RMS
CAT II when DC-coupled*
1
100 X
Floatable up to 600 V
RMS
CAT II
For TPS2000 and THS3000 Series Oscilloscopes
P5150
DC to 500 MHz
2500 V
Peak
, 1000 V
RMS
CAT II
50 X
Floatable up to 600 V
RMS
CAT II or 300 V
RMS
CAT III
For TPS2000 and THS3000 Series Oscilloscopes
P6015A
DC to 75 MHz
High Voltage - 20 kV DC / 40 kV Peak (100 ms Pulse Width)
Optional 1000X readout coding
Applications
Power supply design
Design motor drive
Electronic ballast
Power semiconductors
Switch mode control
UPS systems
Power converters
P5100A High-Voltage Probe
The P5100A is a low input capacitance, high-voltage probe (2.5 kV)
designed for higher-frequency applications. The probe can be
compensated to match plug-ins and oscilloscopes with nominal input
capacitances of 7-30 pF. A variety of screw-on accessories provide easy
connection to the device-under-test.
www.tektronix.com 1

Summary of content (6 pages)