Datasheet

Specifications
Specifications apply to all models unless noted otherwise.
Model overview
THS3014 THS3024
Isolated input channels 4 4
Analog bandwidth (-3 dB) 100 MHz 200 MHz
Rise time 3.5 ns 1.7 ns
Hardware bandwidth limits 20kHz, 20 MHz, or full
Float voltage 1000 V
RMS
CAT II / 600 V
RMS
CAT III from BNC shell to earth ground
Maximum sample rate 2.5 GS/s (1.25 GS/s 4-ch) 5 GS/s (1.25 GS/s 4-ch)
Maximum record length (all channels) 10,000 points (30,000 points in roll mode (4 ms to 2 min / div))
Vertical system
Input coupling AC, DC
Input impedance 1 MΩ ±1%, 14 pF ±2 pF
Input sensitivity range 2 mV/div to 100 v/div
Vertical resolution 8 bits
DC gain accuracy ±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
Max BNC input voltage (1 MΩ) 300 V
RMS
CAT III from BNC signal to BNC shell
Max probe voltage (with standard
THP0301-X probe)
300 V
RMS
CAT III from 10:1 probe tip signal to BNC and reference lead
Trace positioning ±4 divisions
Horizontal system
Time base range (s/div)
THS3014 2 ns to 4 s
THS3024 1 ns to 4 s
Delay time range 1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger
Timing accuracy ±100 ppm + 0.04 div
Zoom Horizontally expand or compress a live or stopped waveform
Trigger system
Input source Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground
Main trigger modes Auto-level, Auto, Normal, and Single
Trigger coupling DC, HF reject, Noise reject (reduces sensitivity)
Trigger sensitivity, internal DC
coupled
0.5 divisions from DC to 5 MHz at >5 mV/div
THS3024 1 divisions >5 MHz to 200 MHz (THS3024)
THS3014 1 divisions >5 MHz to 100 MHz
Datasheet
6 www.tektronix.com