User's Manual

Product Description
2
P7225 2.5 GHz 10X Active Probe User Manual
When the probe is connected, the host i nstrument reads EEPROM
information from the probe, identifying t he de vice and allowing the
appropriate power supplies to be powe red on. The preamp inputs on
the host instrument are electrostati c di scharge protected by
remaining grounded until a valid TekConnect device is detected.
Installation
The TekConnect Interface features a spring-loaded latch tha t
provides audible and tactile confirmation that a reliable connection
has been made to the host instrument. Slide the probe into the
TekConnect receptacle on the host instrument. The probe snaps into
the host instrument when fully engaged. See Figure 2.
To release the probe from the host instrument, gra sp the compensa-
tion box, depress the latch but ton, and pull out the probe.
Latch
button
Figure 2: Connecting and disconnecting the probe