User's Manual

Operating Basics: User Interface
2-90 OTS9100 User Manual
Connecting to an OTS System
ResultsViewer uses the same mechanism as the OTS User Interface program, TekUI. The OTS
user manual discusses this procedure in more detail. In quick overview, click on File and Select
Server in ResultsViewer. A dialog box displays from which the user can connect to an OTS
system or disconnect an existing connection.
NOTE: When ResultsViewer is started from TekUI, it starts, by default, connected to the same
OTS system as TekUI.
Viewing results files
When a test results file is opened, a measurement screen is displayed, as shown in Figure 2-65.
The screen has three tabs for Cumulative Results, Analysis Results, and History Data. The
window title bar displays the file name, the start time for the test displayed, and the device whose
data is displayed.
These screens provide the same information and controls as the Measurement Results screens in
the TekUI. Refer to Measurement Results section of the module user manual for detailed
information of the data presented.
Figure 2-65: Cumulative Results screen of the ResultsViewer