User manual

Installation
USB hubs are not sup ported . You can connect only one USBTMC-USB488 compliant instrument to the USB Host po rt
of the adapter at any time .
The GPIB on/off s ta te is online when there is an active USBTMC-USB488 connection. You cannot change the GPIB on/off
state after the connection is established.
Updating Firmware
To update the adapter firmware:
1. Power off the adapter.
2. Disconnect any USB or GPIB devices from
the adapter.
TEK-USB-488 GPIB to USB Adapter User Manu al 11