User manual

Installation
Connecting Power
You can con nect power to the adapte r in one of two w ays:
From a USB host port
From the optional external power supply
Connecting USB Power
To apply power to your ad apter from a USB host port, do the following procedure:
1. Connect the device end of a USB cable to
the USB Device port on the rear panel of
the adapter.
2. Connect the host end of the USB cable to
a USB Host port on the equipment that is
to provide power (typically the instrument
being controlled or a PC).
4 TEK-USB-488 GPIB to USB Adapter User Ma nual