Datasheet

Datasheet
Adapter configuration to controller and instrument
Tektronix Instrument GPIB Adapter
The TEK-USB-488 Adapter enables communication between a GPI B bus
controller, and the USB port of a USBTMC-USB488 compliant Tektronix
instrument (for example, the DPO4000 Series Oscilloscopes).
Characteristics
System Requirements
Compatible with Tektronix instruments providing USBTMC-USB488 compliant USB
ports supporting the protocol and USB extensions required for setting the adapter’s
GPIB primary address. For USBTMC-USB488 instruments not supporting these
USB extensions and protocol, the GPIB address defaults to address “1” and cannot
be changed. Each adapter controls one instrument and does not support use of
USB hubs.
IEEE 488 (GPI B) Compatibility
Physical Connection – GPIB interface connector provided on adapter.
Compliance – IEEE 488.2 compliant.
Other
Bulk Data Rate – Specification not available at this time.
Front-panel Indicators – Power Applied, Adapter Status, and USB Status.
Environmental
Temperature
Operating – 0°Cto+50°C.
Non
operating –
-20°Cto+60°C.
Humidity
Operating – (High) 40 °C to 50 °C, 10% to 60% relative humidity; (Low) 0 °C to
40 °C, 10% to 90% relative humidity.
Nonoperating – (High) 40 °C to 60 °C, 5% to 60% relative humidity; (Low) 0 °C to
40 °C, 5% t
o 90% relative humidity.
Altitude
Operating – Up to 3,000 m (10,000 ft.).
Nonoperating – Up to 15,240 m (50,000 ft.).
Regulatory
Emissions Compliance – EN 55011, Class A.
EMC Compliance – EN61326, Class A.
Compliance Labeling –
C-Tick (Australia / New Zealand).
CE (European Union).
WEEE (European Union).
Power
Source Power – Provided by USB host or orderable external power supply.
Power Consumption – Regulatedat5VDCat<500mA.
Physical Char acteristics
Dimen
sions
mm
in.
Heigh
t
48.25 1.9
Widt
h
133.
35
5.25
Dept
h
133.
35
5.25
Weight kg lb.
Net 0.56 1.25
Standard Warranty
One
year parts and labor.
2 www.tektronix.com