Certificates

Conditions and Notes
This product is intended for use in non-residential areas only. Use in residential areas may cause electromagnetic interference.
Compliance For compliance with the EMC standards listed here, high quality shielded interface cables that incorporate low impedance
connection between the cable shield and the connector shell should be used.
Emissions that exceed the limits of applicable listed standards may occur when the equipment is connected to a test object.
Equipment may not meet the immunity requirements of applicable listed standards when test leads and/or test probes are connected.
≤1.0 division waveform displacement or ≤2.0 division increase in peak-to-peak noise is allowed when the instrument is subjected to fields
and signals as defined in the IEC 61000-4-3 test.
≤0.5 division waveform displacement or ≤1.0 division increase in peak-to-peak noise is allowed when the instrument is subjected to fields
and signals as defined in the IEC 61000-4-6 test.
Chris Witt, General Manager, Mainstream Oscilloscopes, Tektronix, Inc.
Martin Baggs, Compliance Manager, Tektronix, Inc.