Additional Information

Data Sheet
Acquisition Modes
Mode Description
Peak Detect
High-frequency and random glitch capture. Captures glitches
as narrow as 12 ns (typical) at all time base settings from
5 μs/divto50s/div
Sample Sample data only
Average
Waveform averaged, selectable: 4, 16, 64, 128
Single Sequence Use the Single Sequence button to capture a single triggered
acquisition sequence
Roll
At acquisition time base settings of >100 ms/div
Trigger System
Characteri
stic
Description
Trigger Modes
Auto, Normal, Single Sequence
Trigger Types
Trigger Descripti
on
Edge
(Rising/F
alling)
Conventional level-driven trigger. Positive or negative slope
on any channel. Coupling selections: AC, DC, Noise Reject,
HF Reject, LF Reject
Video
Trigger on all lines or individual lines, odd/even or all fields
from composite video, or broadcast standards (NTSC, PAL,
SECAM)
Pulse Width (or
glitch)
Trigge
r on a pulse width less t han, greater than, equal to, or
not equ
al to, a selectable time limit ranging from 33 ns to 10 s
Trigg
er Source
Characteristic
Description
2-channel Models
CH1, CH2, Ext, Ext/5, AC Line
4-channel Models
CH1,CH2,CH3,CH4,Ext,Ext/5,ACLine
Trigger View
Displays trigger signal while Trigger View button is depressed.
Trig
ger Signal Frequency Readout
Provides a frequency readout of the trigger source.
Cursors
Characteristic
Description
Types Amplitude, Time
Measurements
ΔT, 1 /ΔT, ΔV
Automatic Waveform Measu rements
Period, Frequency, +Width, –Width, Rise Time, Fall Time, Max, Min,
Peak-to-Peak, Mean, RMS, Cycle RMS, Cursor RMS, Duty Cycle, Phase,
Delay
Wa veform Math
Characteristic
Description
Operators Add, Subtract, Multiply, FFT
FFT Windows: Hanning, Flat Top, Rectangular
2048 sample points
Sources
2-channel models
CH1 – CH2, CH2 – CH1, CH1 + CH2, CH1 × CH2
4-channel models
CH1 – CH2, CH2 – CH1, CH3 – CH4, CH4 – CH3, CH1 +
CH2, CH3 + CH4, CH1 × CH2, CH3 × CH4
Autoset M enu
Single-but
ton, automatic setup of all channels for vertical, horizontal, and trigger
systems, w
ith undo Autoset.
Signal Type Autoset Menu Choices
Square Wave Single Cycle, Multicycle, Rising or Falling Edge
Sine Wave Single Cycle, Multicyc le, FFT Spectrum
Video (NTSC, PAL,
SECAM)
Field: All, Odd, or Even
Line: A ll or Selectable Line Number
Autorange
Automatically adjust vertical and/or horizontal oscilloscope settings when
probe is moved from point to point, or when the signal exhibits large changes.
Display Characteristics
Characteristic
Description
Display
QVGA Active Color TFT
Interpolation
Sin(x)/x
Display Types Dots, vectors
Persistence
Off,1s,2s,5s,infinite
Format YT and XY
Multiple-languag e User Interface and Context-sensitive Help
Characteristic
Description
Languages
Available
English, French, German, Italian, Japanese, Korean,
Portuguese, Russian*
4
,Simplified Chinese, Spanish,
Traditional Chinese
*
4
Requires Russian firmware, indicated by "RUS" suffix.
Environmental and Safety
Characteristic
Description
Temperature
Operating 0 to +50 °C
Nonoperating
–40to+71°C
Humidity
Operating and
nonoperating
Up to 80% RH at or below +40 °C
Upto45%RHupto+50°C
Altitude
Operating and
nonoperating
Up to 3,000 m
Electromagnetic
Compatibility
Meets Directive 2004/108/EC, EN 61326-2-1 Class A;
Australian EMC Framework
Safety UL61010-1:2004, CSA22.2 No. 61010-1:2004,
EN61010-1:2001, IEC61010-1:2001
6 www.tektronix.com