User Manual

Command Descriptions
Related Commands
ALLEv?, *CLS, D
ESE, *ESE, *ESR?, EVENT?, *SRE,
Returns
The event code and message in the following format:
<Even
t Code>< Comma><QString>[ <Event Code><Comma>
<QString>...]
<QSt
ring>::= <Message>;[<Command>]
where <Command> is the c ommand that caused the error and may be returned
whe
n a command error is detected by the oscilloscope. As much of the command
as possible is returned without exceeding the 60 character limit of the <Message>
and <Command> strings combined. The command string is right-justified.
Examples
EVMSG? might return the message EVMSG 110, "Command header error"
EVQty? (Query Only)
Returns the number of event codes that are in the Event Queue. This is useful when
using ALLEv? since it lets you know exactly how many events will be returned.
Group
Status and Error
Syntax
EVQty?
Related Commands
ALLEv?, EVENT?,
Returns
<NR1>
Examples
EVQTY? might return 3 as the number of event codes in the Event Queue.
FACtory
Resets the oscilloscope to its factory default settings. Refer to Appendix B:
Factory Setup for a list of the factory default settings.
Group
Miscellaneous
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-75