User Manual

Command Descriptions
DISplay:STYl
e
Selects how to display the waveform data. This command is equivalent to setting
the Type option in the Display menu.
Group
Display
Syntax
DISplay:STYle { DOTs | VECtors }
DISplay:STYle?
Arguments
DOTs displays individual data points.
VECtors connects adjacent data points.
Examples
DISPLAY:STYLE VE C sets the display to connect adjacent data points.
DISPLAY:STYLE might return DOTS indicating that the display shows individual
waveform data points.
ERRLOG:FIRST? (Query Only)
Returns the first entry in the error log, or an empty string if the error log is empty.
Use this command with ERRLOG:NEXT? to retrieve error log messages.
Group
Calibration a nd Diagnostic
Syntax
ERRLOG:FIRST?
Returns
Refer to the service manual for your oscilloscope for information about error log
message format.
ERRLOG:NEXT? (Query Only)
Returns the next entry in the error log, or an empty string if the error log is empty
or you have reached the end of the log. To start at the top of the error log, run
theERRLOG:FIRST?querytoreturnthefirst error log message. Then use the
ERRLOG:NEXT? query to step through the error log.
Group
Calibration a nd Diagnostic
2-72 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer