User Manual

Command Descriptions
The TDS200 Seri
es is not supported.
Group
Display
Syntax
DISplay:INVert { ON | OFF}
DISplay:INVer
t?
Arguments
OFF chooses a default black-on-white display.
ON chooses a white-on-black display.
Examples
DISPLAY:INVERT might return OFF.
DISplay:PERSistence
Sets the length of time that data points are displayed.
Group
Display
Syntax
DISplay:PERSistence { 1 | 2 | 5 | INF | OFF }
DISplay:PERSistence?
Arguments
1|2|5 specifies the length, in seconds , that the waveform points are displayed
on the screen.
INF specifies infinite persistence.
OFF specifies that persistence is turned off.
Returns
0 meansthatthepersistenceisturnedoff.
2 or 5 means that the persistence is set to two or five seconds.
99 means that the persistence is set to infinite.
Examples
DISPLAY:PERSISTENCE 5 specifies that the waveform points are displayed on
the screen for five seconds before they fade.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-71